Error: "No Hosts Found" - Wireless

Q:  I've gone through several rounds of this with a wireless router, etc, and 
    I've simplified things down to a cross-over cable directly connected to 
    the AT.

        Laptop has firewalls disabled.
        NetBIOS over TCP/IP is enabled.
        Static IP: 192.168.0.11
        Subnet: 255.255.255.0

        AT is set to:
        Static IP: 192.168.0.10
        Subnet: 255.255.255.0

    I can ping the AT from my laptop's command prompt.
    I can ping my laptop via the AT WebServer.

    Yet my AT cannot find my laptop as a host. When I powercycle it, it says 
    "No Hosts Found" after just a couple seconds.



A:  On the AT WebServer's File Access Settings, change USE NETBIOS SHARED 
    FOLDER LOCATION PROTOCOL to SEARCH ENTIRE IP SUBNET FOR SHARED FOLDERS, 
    and this should take care of the error.

______________________________________________________________________________