USB MIDI Cable - Devices not found

Q:  I'm running Windows 98 and having problems installing the USB.  Device 
    status always shows 0 USB MIDI devices found.


A:  Before proceeding, please make sure if you are using Windows 98, that you
    have a Microsoft Windows 98 CD available. 

    Please do the following:

    1. Goto Start>Settings>Control Panel. In the Add/Remove Programs 
       section, remove the Turtle Beach USB MIDI 1x1.

    2. Once the driver is removed, please unplug the Turtle Beach USB 
       MIDI cable and reboot your computer.

    3. Then disable any anti-virus software (Norton,etc) and run the USB 
       MIDI driver installation again from the CD. Please follow the 
       instructions 'Installing your USB MIDI Cable' carefully on Page 4 of 
       the USB Music Studio Kit Quick Start Guide. 

    **If you are still having a problem, please contact your computer or 
      USB card manufacturer to make sure your USB drivers are properly 
      installed and configured in the BIOS.

___________________________________________________________________________